class

classic Classic list List threaded Threaded
12 messages Options
Reply | Threaded
Open this post in threaded view
|

class

Shane-2
So gambas ide crashed while editing source code now i can't change a
class _new definition it keeps

going back to the original one i had even though i deleted the
definition and deleted the class file and reinstalled gambas any ideas


thanks Shane



------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org! http://sdm.link/slashdot
_______________________________________________
Gambas-user mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/gambas-user
Reply | Threaded
Open this post in threaded view
|

Re: class

Jussi Lahtinen
AFAIK Gambas does not reverse your changes... do you mean the IDE crashes
every time you try to make the changes?
Can you send the source?


Jussi

On Fri, Feb 17, 2017 at 3:03 AM, Shane <[hidden email]> wrote:

> So gambas ide crashed while editing source code now i can't change a
> class _new definition it keeps
>
> going back to the original one i had even though i deleted the
> definition and deleted the class file and reinstalled gambas any ideas
>
>
> thanks Shane
>
>
>
> ------------------------------------------------------------
> ------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, SlashDot.org! http://sdm.link/slashdot
> _______________________________________________
> Gambas-user mailing list
> [hidden email]
> https://lists.sourceforge.net/lists/listinfo/gambas-user
>
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org! http://sdm.link/slashdot
_______________________________________________
Gambas-user mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/gambas-user
Reply | Threaded
Open this post in threaded view
|

Re: class

Shane-2
No the ide only crashed once

so my class declaration looks like this

and when i try ti instantiate my class


so no matter what i but into the class new these four variables remain

On 17/02/17 12:15, Jussi Lahtinen wrote:

> AFAIK Gambas does not reverse your changes... do you mean the IDE crashes
> every time you try to make the changes?
> Can you send the source?
>
>
> Jussi
>
> On Fri, Feb 17, 2017 at 3:03 AM, Shane <[hidden email]> wrote:
>
>> So gambas ide crashed while editing source code now i can't change a
>> class _new definition it keeps
>>
>> going back to the original one i had even though i deleted the
>> definition and deleted the class file and reinstalled gambas any ideas
>>
>>
>> thanks Shane
>>
>>
>>
>> ------------------------------------------------------------
>> ------------------
>> Check out the vibrant tech community on one of the world's most
>> engaging tech sites, SlashDot.org! http://sdm.link/slashdot
>> _______________________________________________
>> Gambas-user mailing list
>> [hidden email]
>> https://lists.sourceforge.net/lists/listinfo/gambas-user
>>
> ------------------------------------------------------------------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, SlashDot.org! http://sdm.link/slashdot
> _______________________________________________
> Gambas-user mailing list
> [hidden email]
> https://lists.sourceforge.net/lists/listinfo/gambas-user

------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org! http://sdm.link/slashdot
_______________________________________________
Gambas-user mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/gambas-user
Reply | Threaded
Open this post in threaded view
|

Re: class

Jussi Lahtinen
Looks like this..?


Jussi

On Fri, Feb 17, 2017 at 3:32 AM, Shane <[hidden email]> wrote:

> No the ide only crashed once
>
> so my class declaration looks like this
>
> and when i try ti instantiate my class
>
>
> so no matter what i but into the class new these four variables remain
>
> On 17/02/17 12:15, Jussi Lahtinen wrote:
> > AFAIK Gambas does not reverse your changes... do you mean the IDE crashes
> > every time you try to make the changes?
> > Can you send the source?
> >
> >
> > Jussi
> >
> > On Fri, Feb 17, 2017 at 3:03 AM, Shane <[hidden email]> wrote:
> >
> >> So gambas ide crashed while editing source code now i can't change a
> >> class _new definition it keeps
> >>
> >> going back to the original one i had even though i deleted the
> >> definition and deleted the class file and reinstalled gambas any ideas
> >>
> >>
> >> thanks Shane
> >>
> >>
> >>
> >> ------------------------------------------------------------
> >> ------------------
> >> Check out the vibrant tech community on one of the world's most
> >> engaging tech sites, SlashDot.org! http://sdm.link/slashdot
> >> _______________________________________________
> >> Gambas-user mailing list
> >> [hidden email]
> >> https://lists.sourceforge.net/lists/listinfo/gambas-user
> >>
> > ------------------------------------------------------------
> ------------------
> > Check out the vibrant tech community on one of the world's most
> > engaging tech sites, SlashDot.org! http://sdm.link/slashdot
> > _______________________________________________
> > Gambas-user mailing list
> > [hidden email]
> > https://lists.sourceforge.net/lists/listinfo/gambas-user
>
> ------------------------------------------------------------
> ------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, SlashDot.org! http://sdm.link/slashdot
> _______________________________________________
> Gambas-user mailing list
> [hidden email]
> https://lists.sourceforge.net/lists/listinfo/gambas-user
>
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org! http://sdm.link/slashdot
_______________________________________________
Gambas-user mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/gambas-user
Reply | Threaded
Open this post in threaded view
|

Re: class

Shane-2
Looks Like Pic1

and then pic2



On 17/02/17 13:04, Jussi Lahtinen wrote:

> Looks like this..?
>
>
> Jussi
>
> On Fri, Feb 17, 2017 at 3:32 AM, Shane <[hidden email]> wrote:
>
>> No the ide only crashed once
>>
>> so my class declaration looks like this
>>
>> and when i try ti instantiate my class
>>
>>
>> so no matter what i but into the class new these four variables remain
>>
>> On 17/02/17 12:15, Jussi Lahtinen wrote:
>>> AFAIK Gambas does not reverse your changes... do you mean the IDE crashes
>>> every time you try to make the changes?
>>> Can you send the source?
>>>
>>>
>>> Jussi
>>>
>>> On Fri, Feb 17, 2017 at 3:03 AM, Shane <[hidden email]> wrote:
>>>
>>>> So gambas ide crashed while editing source code now i can't change a
>>>> class _new definition it keeps
>>>>
>>>> going back to the original one i had even though i deleted the
>>>> definition and deleted the class file and reinstalled gambas any ideas
>>>>
>>>>
>>>> thanks Shane
>>>>
>>>>
>>>>
>>>> ------------------------------------------------------------
>>>> ------------------
>>>> Check out the vibrant tech community on one of the world's most
>>>> engaging tech sites, SlashDot.org! http://sdm.link/slashdot
>>>> _______________________________________________
>>>> Gambas-user mailing list
>>>> [hidden email]
>>>> https://lists.sourceforge.net/lists/listinfo/gambas-user
>>>>
>>> ------------------------------------------------------------
>> ------------------
>>> Check out the vibrant tech community on one of the world's most
>>> engaging tech sites, SlashDot.org! http://sdm.link/slashdot
>>> _______________________________________________
>>> Gambas-user mailing list
>>> [hidden email]
>>> https://lists.sourceforge.net/lists/listinfo/gambas-user
>> ------------------------------------------------------------
>> ------------------
>> Check out the vibrant tech community on one of the world's most
>> engaging tech sites, SlashDot.org! http://sdm.link/slashdot
>> _______________________________________________
>> Gambas-user mailing list
>> [hidden email]
>> https://lists.sourceforge.net/lists/listinfo/gambas-user
>>
> ------------------------------------------------------------------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, SlashDot.org! http://sdm.link/slashdot
> _______________________________________________
> Gambas-user mailing list
> [hidden email]
> https://lists.sourceforge.net/lists/listinfo/gambas-user

------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org! http://sdm.link/slashdot
_______________________________________________
Gambas-user mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/gambas-user

pic1.png (28K) Download Attachment
pic2.png (36K) Download Attachment
Reply | Threaded
Open this post in threaded view
|

Re: class

Jussi Lahtinen
OK, so the signature is not updated... have you tried to recompile all from
Gambas IDE? Is that library or regular Gambas project?


Jussi

On Fri, Feb 17, 2017 at 4:08 AM, Shane <[hidden email]> wrote:

> Looks Like Pic1
>
> and then pic2
>
>
>
>
> On 17/02/17 13:04, Jussi Lahtinen wrote:
>
>> Looks like this..?
>>
>>
>> Jussi
>>
>> On Fri, Feb 17, 2017 at 3:32 AM, Shane <[hidden email]> wrote:
>>
>> No the ide only crashed once
>>>
>>> so my class declaration looks like this
>>>
>>> and when i try ti instantiate my class
>>>
>>>
>>> so no matter what i but into the class new these four variables remain
>>>
>>> On 17/02/17 12:15, Jussi Lahtinen wrote:
>>>
>>>> AFAIK Gambas does not reverse your changes... do you mean the IDE
>>>> crashes
>>>> every time you try to make the changes?
>>>> Can you send the source?
>>>>
>>>>
>>>> Jussi
>>>>
>>>> On Fri, Feb 17, 2017 at 3:03 AM, Shane <[hidden email]> wrote:
>>>>
>>>> So gambas ide crashed while editing source code now i can't change a
>>>>> class _new definition it keeps
>>>>>
>>>>> going back to the original one i had even though i deleted the
>>>>> definition and deleted the class file and reinstalled gambas any ideas
>>>>>
>>>>>
>>>>> thanks Shane
>>>>>
>>>>>
>>>>>
>>>>> ------------------------------------------------------------
>>>>> ------------------
>>>>> Check out the vibrant tech community on one of the world's most
>>>>> engaging tech sites, SlashDot.org! http://sdm.link/slashdot
>>>>> _______________________________________________
>>>>> Gambas-user mailing list
>>>>> [hidden email]
>>>>> https://lists.sourceforge.net/lists/listinfo/gambas-user
>>>>>
>>>>> ------------------------------------------------------------
>>>>
>>> ------------------
>>>
>>>> Check out the vibrant tech community on one of the world's most
>>>> engaging tech sites, SlashDot.org! http://sdm.link/slashdot
>>>> _______________________________________________
>>>> Gambas-user mailing list
>>>> [hidden email]
>>>> https://lists.sourceforge.net/lists/listinfo/gambas-user
>>>>
>>> ------------------------------------------------------------
>>> ------------------
>>> Check out the vibrant tech community on one of the world's most
>>> engaging tech sites, SlashDot.org! http://sdm.link/slashdot
>>> _______________________________________________
>>> Gambas-user mailing list
>>> [hidden email]
>>> https://lists.sourceforge.net/lists/listinfo/gambas-user
>>>
>>> ------------------------------------------------------------
>> ------------------
>> Check out the vibrant tech community on one of the world's most
>> engaging tech sites, SlashDot.org! http://sdm.link/slashdot
>> _______________________________________________
>> Gambas-user mailing list
>> [hidden email]
>> https://lists.sourceforge.net/lists/listinfo/gambas-user
>>
>
>
> ------------------------------------------------------------
> ------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, SlashDot.org! http://sdm.link/slashdot
> _______________________________________________
> Gambas-user mailing list
> [hidden email]
> https://lists.sourceforge.net/lists/listinfo/gambas-user
>
>
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org! http://sdm.link/slashdot
_______________________________________________
Gambas-user mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/gambas-user
Reply | Threaded
Open this post in threaded view
|

Re: class

Benoît Minisini
In reply to this post by Shane-2
Le 17/02/2017 à 03:08, Shane a écrit :
> Looks Like Pic1
>
> and then pic2
>
>
>

Which version of Gambas do you use?

--
Benoît Minisini

------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org! http://sdm.link/slashdot
_______________________________________________
Gambas-user mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/gambas-user
Reply | Threaded
Open this post in threaded view
|

Re: class

Shane-2
In reply to this post by Jussi Lahtinen
yes i have tried recompiling its a sdl project

it seems like their is a backup file some where that wasn't deleted when
the IDE crashed

but i can't find any




On 17/02/17 13:49, Jussi Lahtinen wrote:

> OK, so the signature is not updated... have you tried to recompile all from
> Gambas IDE? Is that library or regular Gambas project?
>
>
> Jussi
>
> On Fri, Feb 17, 2017 at 4:08 AM, Shane <[hidden email]> wrote:
>
>> Looks Like Pic1
>>
>> and then pic2
>>
>>
>>
>>
>> On 17/02/17 13:04, Jussi Lahtinen wrote:
>>
>>> Looks like this..?
>>>
>>>
>>> Jussi
>>>
>>> On Fri, Feb 17, 2017 at 3:32 AM, Shane <[hidden email]> wrote:
>>>
>>> No the ide only crashed once
>>>> so my class declaration looks like this
>>>>
>>>> and when i try ti instantiate my class
>>>>
>>>>
>>>> so no matter what i but into the class new these four variables remain
>>>>
>>>> On 17/02/17 12:15, Jussi Lahtinen wrote:
>>>>
>>>>> AFAIK Gambas does not reverse your changes... do you mean the IDE
>>>>> crashes
>>>>> every time you try to make the changes?
>>>>> Can you send the source?
>>>>>
>>>>>
>>>>> Jussi
>>>>>
>>>>> On Fri, Feb 17, 2017 at 3:03 AM, Shane <[hidden email]> wrote:
>>>>>
>>>>> So gambas ide crashed while editing source code now i can't change a
>>>>>> class _new definition it keeps
>>>>>>
>>>>>> going back to the original one i had even though i deleted the
>>>>>> definition and deleted the class file and reinstalled gambas any ideas
>>>>>>
>>>>>>
>>>>>> thanks Shane
>>>>>>
>>>>>>
>>>>>>
>>>>>> ------------------------------------------------------------
>>>>>> ------------------
>>>>>> Check out the vibrant tech community on one of the world's most
>>>>>> engaging tech sites, SlashDot.org! http://sdm.link/slashdot
>>>>>> _______________________________________________
>>>>>> Gambas-user mailing list
>>>>>> [hidden email]
>>>>>> https://lists.sourceforge.net/lists/listinfo/gambas-user
>>>>>>
>>>>>> ------------------------------------------------------------
>>>> ------------------
>>>>
>>>>> Check out the vibrant tech community on one of the world's most
>>>>> engaging tech sites, SlashDot.org! http://sdm.link/slashdot
>>>>> _______________________________________________
>>>>> Gambas-user mailing list
>>>>> [hidden email]
>>>>> https://lists.sourceforge.net/lists/listinfo/gambas-user
>>>>>
>>>> ------------------------------------------------------------
>>>> ------------------
>>>> Check out the vibrant tech community on one of the world's most
>>>> engaging tech sites, SlashDot.org! http://sdm.link/slashdot
>>>> _______________________________________________
>>>> Gambas-user mailing list
>>>> [hidden email]
>>>> https://lists.sourceforge.net/lists/listinfo/gambas-user
>>>>
>>>> ------------------------------------------------------------
>>> ------------------
>>> Check out the vibrant tech community on one of the world's most
>>> engaging tech sites, SlashDot.org! http://sdm.link/slashdot
>>> _______________________________________________
>>> Gambas-user mailing list
>>> [hidden email]
>>> https://lists.sourceforge.net/lists/listinfo/gambas-user
>>>
>>
>> ------------------------------------------------------------
>> ------------------
>> Check out the vibrant tech community on one of the world's most
>> engaging tech sites, SlashDot.org! http://sdm.link/slashdot
>> _______________________________________________
>> Gambas-user mailing list
>> [hidden email]
>> https://lists.sourceforge.net/lists/listinfo/gambas-user
>>
>>
> ------------------------------------------------------------------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, SlashDot.org! http://sdm.link/slashdot
> _______________________________________________
> Gambas-user mailing list
> [hidden email]
> https://lists.sourceforge.net/lists/listinfo/gambas-user


------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org! http://sdm.link/slashdot
_______________________________________________
Gambas-user mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/gambas-user
Reply | Threaded
Open this post in threaded view
|

Re: class

Shane-2
In reply to this post by Benoît Minisini
It seems i can compile it now just the signature is not updated as
before it would just add definitions to the end if i added them as new ones



[System]
Gambas=3.9.90
OperatingSystem=Linux
Kernel=4.4.0-45-generic
Architecture=x86_64
Distribution=Linux Mint 17.2 Rafaela
Desktop=MATE
Theme=Gtk
Language=en_AU.UTF-8
Memory=3805M

[Libraries]
Cairo=libcairo.so.2.11301.0
Curl=libcurl.so.4.3.0
DBus=libdbus-1.so.3.7.6
GStreamer=libgstreamer-0.10.so.0.30.0
GStreamer=libgstreamer-1.0.so.0.204.0
GTK+2=libgtk-x11-2.0.so.0.2400.23
GTK+3=libgtk-3.so.0.1000.8
OpenGL=libGL.so.1.2.0
Poppler=libpoppler.so.44.0.0
QT4=libQtCore.so.4.8.6
QT5=libQt5Core.so.5.2.1
SDL=libSDL-1.2.so.0.11.4
SQLite=libsqlite3.so.0.8.6

[Environment]
DBUS_SESSION_BUS_ADDRESS=unix:abstract=/tmp/dbus-9R1w2qGsy4,guid=ca2f4b9de0de2b55e96cbd6258a62c4c
DEFAULTS_PATH=/usr/share/gconf/mate.default.path
DESKTOP_SESSION=mate
DISPLAY=:0.0
GB_GUI=gb.qt4
GDMSESSION=mate
GDM_XSERVER_LOCATION=local
GNOME_KEYRING_CONTROL=/run/user/1000/keyring-RFhy2e
GNOME_KEYRING_PID=1894
GPG_AGENT_INFO=/run/user/1000/keyring-RFhy2e/gpg:0:1
HOME=<home>
KICAD_PATH=/usr/share/kicad
KIGITHUB=https://github.com/KiCad
LANG=en_AU.UTF-8
LOGNAME=<user>
MANDATORY_PATH=/usr/share/gconf/mate.mandatory.path
MATE_DESKTOP_SESSION_ID=this-is-deprecated
MDMSESSION=mate
MDM_LANG=en_AU.UTF-8
MDM_XSERVER_LOCATION=local
PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games
PWD=<home>
SESSION_MANAGER=local/<hostname>:@/tmp/.ICE-unix/1650,unix/<hostname>:/tmp/.ICE-unix/1650
SHELL=/bin/bash
SSH_AGENT_PID=1811
SSH_AUTH_SOCK=/run/user/1000/keyring-RFhy2e/ssh
TEXTDOMAIN=im-config
TEXTDOMAINDIR=/usr/share/locale/
TZ=:/etc/localtime
USER=<user>
USERNAME=<user>
WINDOWPATH=8
XAUTHORITY=<home>/.Xauthority
XDG_CONFIG_DIRS=/etc/xdg/xdg-mate:/etc/xdg
XDG_CURRENT_DESKTOP=MATE
XDG_DATA_DIRS=/usr/share/mate:/usr/local/share/:/usr/share/:/usr/share/mdm/
XDG_RUNTIME_DIR=/run/user/1000
XDG_SEAT=seat0
XDG_SESSION_COOKIE=139d2632112d070b9e811bbc561842ce-1487285321.822054-1664871980
XDG_SESSION_DESKTOP=mate
XDG_SESSION_ID=c1
XDG_VTNR=8



On 17/02/17 13:55, Benoît Minisini wrote:
> Le 17/02/2017 à 03:08, Shane a écrit :
>> Looks Like Pic1
>>
>> and then pic2
>>
>>
>>
> Which version of Gambas do you use?
>


------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org! http://sdm.link/slashdot
_______________________________________________
Gambas-user mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/gambas-user
Reply | Threaded
Open this post in threaded view
|

Re: class

Shane-2
In reply to this post by Benoît Minisini
here is the code it looks like its the way I'm doing things with inheriting



On 17/02/17 13:55, Benoît Minisini wrote:
> Le 17/02/2017 à 03:08, Shane a écrit :
>> Looks Like Pic1
>>
>> and then pic2
>>
>>
>>
> Which version of Gambas do you use?
>


------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org! http://sdm.link/slashdot
_______________________________________________
Gambas-user mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/gambas-user
Reply | Threaded
Open this post in threaded view
|

Re: class

Shane-2
In reply to this post by Benoît Minisini
here it is


On 17/02/17 13:55, Benoît Minisini wrote:
> Le 17/02/2017 à 03:08, Shane a écrit :
>> Looks Like Pic1
>>
>> and then pic2
>>
>>
>>
> Which version of Gambas do you use?
>


------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org! http://sdm.link/slashdot
_______________________________________________
Gambas-user mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/gambas-user

Gamtetris-0.0.1.tar.gz (73K) Download Attachment
Reply | Threaded
Open this post in threaded view
|

Re: class

Shane-2
In reply to this post by Benoît Minisini
I think this is my problem


      3.4. Inheritance and constructor

Contrary to all the object language I know, each class in the
inheritance hierarchy consumes the parameters passed to the constructor.

Let's suppose we have the following inheritance tree:

|MyListBox ---inherits--> ListBox ---inherits---> Control |

  *

    Control <http://gambaswiki.org/wiki/comp/gb.gtk/control>._new() does
    not exist.

  *

    ListBox <http://gambaswiki.org/wiki/comp/gb.qt4/listbox>._new()
    takes one parameter: the parent control.

  *

    MyListBox._new() takes one parameter: a name - It is just an example.

So |NEW <http://gambaswiki.org/wiki/lang/new> MyListBox| will take two
parameters.

  *

    The first will be sent to ListBox
    <http://gambaswiki.org/wiki/comp/gb.qt4/listbox>._new().

  *

    The second to MyListBox._new().

Be careful: the ListBox
<http://gambaswiki.org/wiki/comp/gb.qt4/listbox>._new() will be called
first, so that you are sure that the ListBox
<http://gambaswiki.org/wiki/comp/gb.qt4/listbox> control exists when you
are in MyListBox._new().

Then you will create a MyListBox control this way:

hMyListBox *=* *New* *MyListBox**(*hContainer*,* "Name"*)*

So the order of arguments is the following:

  *

    Mandatory arguments are consumed first, and then optional arguments
    if they are available.

  *

    The arguments of elder classes are specified first.

In Gambas 2.0, the order or arguments were reversed!

For example, if you have the following inheritance:

|MyForm --> Form --> Window |

with the MyForm constructor being:

|Sub _new(FirstArg As String, SecondArg as Integer, Optional ThirdArg As
Integer) |

Note: the Form <http://gambaswiki.org/wiki/comp/gb.qt4/form> constructor
takes no argument, and the Window
<http://gambaswiki.org/wiki/comp/gb.qt4/window> constructor takes an
optional parent argument.

The signature of the final constructor will be:

|New MyForm(FirstArg As String, SecondArg As Integer, Optional Parent As
Control, Optional ThirdArg As Integer) |

In a more general way, the order of arguments for a three level
inheritance tree is:

  *

    Mandatory arguments of the grand-parent constructor.

  *

    Mandatory arguments of the parent constructor.

  *

    Mandatory arguments of the final constructor.

  *

    Optional arguments of the grand-parent constructor.

  *

    Optional arguments of the parent constructor.

  *

    Optional arguments of the final constructor.


On 17/02/17 13:55, Benoît Minisini wrote:
> Le 17/02/2017 à 03:08, Shane a écrit :
>> Looks Like Pic1
>>
>> and then pic2
>>
>>
>>
> Which version of Gambas do you use?
>

------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org! http://sdm.link/slashdot
_______________________________________________
Gambas-user mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/gambas-user